| The round shaped heavy gold plated case measures 1 1/4" across (including the crown) and 1 9/16" (lug to lug.) It is 1/4" thick. The original crown is located at the 3 o'clock position and marked 100% W-P"RW". The back of the screw down case is marked Unbreakable Mainspring, Stainless Steel Back, Antimagnetic, Waterproof, Made and Timed in Switzerland, and Incabloc. |
| The dial on this piece is an absolute masterpiece of the watch making art. It features a rare wind indicator located at the 9 o'clock position that is marked in increments of 44, 33, 22, 11 and 0 hours. The hour makers at the 12, 2, 4, 6, 8, and 10 o'clock positions are a very moddish style form of Arabic numerals. The other hour markers are in the form of a rectangular lines and located at the 1, 5, 7, 9, and 11 o'clock positions. There is a 60 seconds/minutes scale along the edge of the dial with small luminous dots marking each of the 12 hour markers. The date window is at the 3 o'clock position and features red Arabic numerals. The dauphine-style hour and minutes hands are gold in color with a sharp central angle. And the sweeping seconds hand is gold in color. The crystal has a flat surface with a slight curvature on the sides and is raised 3MM above the case at its center. It is marked Brera, Rotomatic, 30 Jewels below the 12 o'clock position, and UM, Automatic, Waterproof, and Incabloc above the 6 o'clock position, and Swiss Made below the 6 o'clock position. |